MIL-DTL-45334 Compressor Assemblies, Airbrake System; Wheeled VehicleThis specification covers eight types of air compressors for airbrake systems of military wheeled vehicles. This specification also covers accessory governors and air cleaners for type I and type II compressors \(see 6.1\).

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23

MIL-DTL-45334E

NOTES:

1. Recommended maximum operating speed - 2400 rpm.

2. Maximum build-up time to pump a 1000 cubic inch reservoir to 100 psig

(690 kPa):

35 seconds at compressor speed of 2400 rpm.

55 seconds at compressor speed of 1200 rpm.

3. Compressor shall be constructed to allow 180� rotation of the head and block

assembly to provide for right or left hand location of the inlet and discharge

flanges. Manufacturer shall furnish an instruction sheet, together with

necessary spare gasket for each compressor.

4. Maximum weight: 37 lb (16.76 kg).

5. Dimensions are in inches. Unless otherwise specified, tolerances are +0.02 on

2 place fractions and +0.005 on 3 place fractions, +1�angle casting dimensions

shall be +0.006.

FIGURE 2. Compressor, reciprocating, power driven: air cooled, 12 ft3/min

w/unloader - Continued.