MIL-A-62463B(AT)
4.5.1.2 Sampling for examination. Samples for quality conformance examination shall be
selected in accordance with table IV. Accept on zero defects, and reject on one or more defects.
TABLE IV. Sampling of for examination.
Sample Size
Lot size
For Major
For Minor
Characteristics
Characteristics
3
Entire Lot
2 to 13
3
13
14 to 25
5
13
26 to 50
6
13
51 to 90
7
13
91 to 150
10
20
151 to 280
11
29
281 to 500
15
34
501 to 1200
18
42
1201 to 3200
22
50
3201 to 10,000
NOTE: Accept lot on zero defects. Reject lot on one or more defects.
4.5.2 Quality conformance examinations.
4.5.2.1 Acceptable quality level. Each sample selected in accordance with 4.5.1.2 shall be
examined for the defects listed in table V. Accept on zero defects. Reject on one or more
defects.
TABLE V. Classification of defects.
Method of
Category
Defect
examination
Major
101
Construction: Not to drawing (see 3.3).
Visual
102
Dimensions affecting interchangeability:
Visual and
Not within tolerance (see 3.3.1).
SIE 1/
103
Visual
Workmanship: Not as specified (see 3.8).
Minor
201
Visual and
Dimensions not affecting interchangeability: Not to
SIE 1/
tolerance (see 3.3.1).
Visual
202
Identification and marking: Not as specified (see 3.5).
Visual
203
Nameplates: Not as specified (see 3.6).
Visual
204
Painting: Not as specified, poor coverage (see 3.7).
1/ SIE = Standard Inspection Equipment
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business