MIL-DTL-13719G
1.2.2 Inside diameter (ID). ID designators, see table II.
1.2.3 Hose lengths. Lengths of bulk hose are represented by inches and fractions in 1/8 inch
increments.
1.2.3.1 Lengths of hose. Lengths of hose are represented by inches unless bulk hose is required
see 1.2.3.3.
1.2.3.2 Fractions. Fractions are expressed in 1/8 inch increments (1 thru 7). Not applicable to bulk
hose lengths.
1.2.3.3 Bulk hose lengths. Bulk hose lengths are represented by the letter B or S. Bulk lengths "B"
are in increments of 20 feet or more (see 3.4.3.1). The "S" designator is used to define specific lengths in
feet (see 3.4.3.2).
Note: For the inch designator insert the number zero in front of designator for lengths less than 100
inches (2.54 m).
Examples:
When 12 and 7/8 inch length is required the designator is: 012-7
When 96 inches is required the designator is: 096
When 30 feet total length is required the designator is: 030-B
When 30 feet continuous length is required with a 1% tolerance the designator is: 030-S
1.3. PIN for hose assemblies. See 3.6.3.
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3, 4, or 5 of this
specification. This section does not include documents cited in other sections of this specification or
recommended for additional information or as examples. While every effort has been made to ensure the
completeness of this list, document users are cautioned that they must meet all specified requirements
documents cited in sections 3, 4, or 5, of this specification, whether or not they are listed.
2.2 Government documents.
2.2.1 Specifications standards, and handbooks. The following specifications, standards, and
handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the
issues of these documents are those cited in the solicitation or contract.
FEDERAL STANDARD
FED-STD-162
-
Hose, Rubber, Visual Inspection Guide For
DEPARTMENT OF DEFENSE SPECIFICATION
MIL-PRF-46176 -
Brake Fluid, Silicone, Automotive, All Weather, Operational and
Preservative
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business