MIL-PRF-62364B
(Copies of these drawings are available from the U.S. Army Tank-automotive and
Armaments Command, ATTN: AMSTA-TR-E/BLUE, Warren, MI 48397-5000.)
2.3 Order of precedence. In the event of a conflict between the text of this document
and the references cited herein, the text of this document takes precedence. Nothing in this
document, however, supersedes applicable laws and regulations unless a specific exemption has
been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article
inspection in accordance with 4.2.
3.2 Materials. The materials specified on Drawing 12265502 shall be used for guidance
purposes only (i.e.: to determine form fit, and size so as to be compatible with referenced
interface Drawing 12265895). The materials shall be capable of meeting all the performance and
environmental requirements specified herein. Asbestos, cadmium, and radioactive material shall
not be used in this item. Radioactive material is defined by CFR, Title 10, Parts 30 and 40, and
other radioactive material in which the specific activity is greater than 0.002 microcuries per gram
or the activity per item equals or exceeds 0.01 microcuries (see 4.5.1).
3.2.1 Corrosion resistance. All metals shall be corrosion resistant or shall be suitably
protected against corrosion, internally and externally, during normal service life. Particular
attention shall be paid to the metal and finish in contact with the friction brake material to assure
under operating conditions that the friction material does not become contaminated by foreign
particles of metal or protective finish residues which will alter performance of the brake.
Dissimilar metals shall either be insulated to prevent galvanic corrosion or shall not be used
(see 4.5.1).
3.2.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered,
or environmentally preferable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs (see 4.5.1).
3.2.3 Fungus. Only materials which are fungus non-nutrient shall be used (see 4.5.1).
3.3 Design and construction. The design and construction and cited specifications on
Drawing 12265502, shall be used for guidance purposes only (i.e., to determine form, fit, and size
so as to be compatible with referenced interface Drawing 12265895). The design shall meet all of
the performance requirements and cited specifications and documents contained herein. The
brake assembly shall be designed to mount on a gearbox, and to apply frictional braking to the
output shaft by means of brake pads. The brakes will be utilized under the conditions of free
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business