MIL-PRF-62136B
(i.e. nylon, rayon), Federal stock number, purchase order number and the item weight, month and
year of manufacture. The material of the label shall resist discoloration and be stain resistant. The
label shall have a pressure sensitive adhesive backing, which will not allow accidental loss and will
not cause deterioration of tread compound. Federal stock number, purchase order number, and
the item weight shall have letters and numbers 1/4 inch high (see 4.9.2).
3.8.3 Reduced inflation equivalent. When foam inflated wheel and tire assemblies of
"less than nominal" (see 3.4.3.2) inflation pressure equivalent are approved by the contracting
officer, each tire shall be marked with the words "MAX LOAD" followed by rated load for the
actual inflation pressure equivalent, all in capital characters not less than ½ inch (1.27 centimeters
(cm)) high, placed adjacent to the standard ply marking or load range on each sidewall of each
tire. Example: "MAX LOAD 5000#" (see 4.9.2).
3.8.4 Design type. When specified (see 6.2), all tires shall be permanently marked with
the word "MILITARY", in capital letters ½ inch (1.27 cm) high. These letters shall be depressed
into or embossed on the sidewall on the serial number side, under or near the size marking. Class
MR tires shall include "MR" in the marking (see 4.9.2).
3.8.5 Date of manufacture. The month and year of foam processing shall be permanently
branded or shown adjacent to, but distinctly separate from, the serial number. Marking shall
consist of one or two digits representing the month, followed by a dash "-" and two digits
representing the year. Height of date marking shall be comparable to that of the serial number
(see 4.9.2).
3.9 Color. When color shall be as specified in the contract order (see 4.9.2 and 6.2).
3.10 Workmanship. Workmanship shall be such as to produce a finished product that is
clean and free from defects that will affect its life, or appearances. Workmanship shall be such as
to ensure that the finished product is in conformance to this specification (see 4.9.2).
4. VERIFICATION
4.1 Classification of inspections:
a. Preproduction inspection (see 4.2).
b. Initial production inspection (see 4.3).
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business