MIL-PRF-62136B
TABLE IV. Cross reference test sequence (continued).
Initial
Require-
Inspec-
Prepro- pro-
Accept- Con-
Title
ment
tion
duction duction
ance
trol
Rebound
3.2.1.5
4.6.5
X
X
X
Weight of foam
3.4.3.1
4.7.1
X
X
X
Foam inflation pressure
equivalent
3.4.3.2
4.7.2
X
X
X
X
Road service
3.6.1
4.8.1
X
X
Gunfire
3.6.2
4.8.2
X
X
4.4 Acceptance test. Twenty percent of the foam inflated wheel and tire assemblies
submitted for acceptance shall be tested for foam inflation pressure equivalent (see table II) to
determine conformance to 3.4.3.2. The 20 percent sample shall be distributed over the
production run to assure compliance.
4.4.1 Failure. Failure of any sample to pass any of the specified acceptance tests shall be
cause for the Govenment to refuse acceptance of the production quantity represented, until action
taken by the contractor to correct defects and prevent recurrence has been approved by the
Government.
4.5 Control tests of tires.
4.5.1 Control test sample. The control test sample shall consist of 1 tire. Samples shall
be selected at the following rates:
Control test
Calendar-year production
(per plant)
(per calendar year)
1 to 500
1 sample
500 to 1000
2 samples
1000 and up
2 samples plus 1
sample for each additional
5000 but not more than 1
additional sample per month
Results of control tests shall be forwarded to the Government if required (see 6.2).
4.5.2 Applicable tests. Unless otherwise specified in the contract or purchase order, tires
selected in accordance with 4.5.1 shall be tested by the supplier. Control test samples shall be
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business