A-A-52522 Lining Brake, And Lining Material Brake: Automotive (Metric)This CID covers automotive brake lining sets and brake lining material used in commercial and military vehicles. Except for the following: heavy construction, heavy military, industrial aeronautical, and any other application where the friction material is compounded specifically for a special purpose vehicle.

Pages 1 - 2 - 3 - 4 - 5 - 6

A-A-52522B

5. QUALITY ASSURANCE PROVISIONS

5.1 Responsibility for inspection. The contractor is responsible for the performance of all inspections, examinations, and tests.

5.2 Product conformance. The products provided shall meet the salient characteristics of this commercial item description, conform to the producer’s own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance.

6. PACKAGING

Preservation, packing, and marking shall be as specified in the contract or order (see 7.2).

7. NOTES

(This section contains information of a general or explanatory nature that may be helpful but is not mandatory.)

7.1 Addresses for obtaining copies of referenced documents.

7.1.1 Government publications. Copies of the Code of Federal Regulations (CFR) are available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC

20402.

7.1.2 Non-Government Publications. Copies of SAE J160 “Swell, Growth, and Dimensional stability of Brake Linings”; SAE J379 “Gogan Hardness of Brake Lining”; SAE J380 “Specific Gravity of Brake Lining”; SAE J661 “Brake Lining Quality Control Test Procedure”; SAE J663 “Rivets For Brake Linings and Bolts for Brake Block”; and SAE J840 “Test Procedures for Brake Shoe and Lining Adhesives and Bonds” are available from the Society of Automotive Engineers, Inc. (SAE), 400 Commonwealth Drive, Warrendale, PA 15096.

7.2 Ordering data. Acquisition documents must specify the following:

a. Title, number, and date of this CID.

b. Issue of Department of Defense Index of Specifications and Standards (DODISS) to be cited

in the solicitation, and if required, the specific issue of individual documents referenced.

c. Type, category, style and class of lining, (PIN) (see 2).

d. Quality control level of Gogan (or other) hardness and specific gravity (see 3.1.1.1).

e. Sets or rolls are to be furnished (see 3.1.2).

f. If inside radius is other than + 0.64 mm (+ 0.025 in) (see 3.2.1.3).